A sliding door from swdbespoke.com is always a great addition to any home, whether you want it for added storage or room dividers. In some cases, you may just need sliding door repair and save the costs of a new door. However, when installing a sliding door it can be difficult to make sure that the doors stay straight and even. Follow these instructions to learn how to install a sliding door in your home.
Before installing the door, to ensure your sliding door runs smoothly you should attach a track to the top of the doorway using screws or double-sided tape. Depending on where you plan to install the sliding door will depend on the type of hardware that you are going to need.
If you are installing your door in an existing opening then it is likely that your door will require a custom kit, if you are building your home then it is likely that your hardware will come with the door. Here are the steps to follow:
Attach the Track
The first thing that you need to do is to attach the track of the sliding door to the top of your doorway or entryway. You can do this by screwing it into place using wood screws so long as the doorway is at least 2 inches deep and the door is able to accommodate the width of the screws.
You can also secure it to the wall using double-sided tape, as long as your door will be able to accommodate it. However, you should always use an adhesive that is rated for outdoors so it can hold up against humidity and other weather conditions.
Install the Door
Once you have installed the track, it is time to install the door. You should open your door so that it is lying against the floor and you can see the bottom of the door as well as both sides. You will then need to attach a hinge to each side at either end of where the door will be installed. For sliding doors, you can use soft-close hinges, which are hinged on the bottom of the door and therefore will not interfere with the movement of the door.
Then close the door so that it is lying against one side of where you plan to install it, leaving enough room to easily attach another hinge above the first hinge. This is so that when you open it, there will be an even gap on either side of the doorway for it to run smoothly along the track. Once they are securely attached, open and close your door several times so you can see how smoothly it runs.
Making Sure It is Level
Once you have installed your sliding door and it is running smoothly along the track, you should place a small level against either side of your door. If one side is not level with the other then it may cause wobbling or difficulty opening and closing the door.
To adjust it, you can carefully remove one of the hinges on that side and add a shim underneath where the hinge attaches to the door. You can add a shim by cutting a thin piece of wood and attaching it with nails or screws. Check your door and repeat if necessary until you get both sides level.
Maintaining Your Door
When you want to clean your sliding glass doors, open them so that there is at least one foot of open space between the edge of the door and the track. Then raise one side so you can easily wipe down the glass from top to bottom, being careful so that nothing gets caught in the track. Proper maintenance will spare you regular sliding door repair.
Once you have wiped down both sides, roll up or lower your door back into place. You should also once a year inspect your sliding door to ensure that the tracks are clean and that there is no debris or dirt in them. If your hardware starts to look worn out, you may want to consider replacing it as well.
With these guidelines, you should be able to install your sliding door without a problem. However, if you are not confident about doing it yourself, you can always hire an expert to install the door in a professional manner. Hanging a new sliding glass door can be an easy project if you take the time to plan it out first.
If you find yourself needing replacement parts for your sliding glass doors, contact us for professional guidance and sliding door repair services. You can never go wrong with the type of solutions that we will recommend for you.